How to build a PC

Are you good at technology? Have you ever built a PC for yourselves?Nowadays, technology is strongly developing and computer becomes very popular and important in morden life.It helps you work quickly and easily.However,the problem here is that how to build a PC. That learning how to use computer is not difficult but how to build a PC is a trouble to many people.In somehow,to build a PC, you have to follow following main steps.
First of all, you have to prepare a lot of materials and basic parts to build a PC.They are motherboard, processor, RAM, video card, case, power supply, hard drive, keyboard, mouse and speakers.These are the important materials to make a good PC. You can buy these parts in electric shop or supermarket.If you feel confused to choose to buy the materials, you can search on the internet to know what kinds of materials are good or modern and you will have many choice to buy the best materials to make up your PC.Moreover,you also learn to install equipment carefully.
Secondly,you have to add processor and RAM to the motherboard.This step is very important because if you do not do this,you can not do the next step.In this step, you must unwrap the motherboard and put it in a table.Next,you have to unwrap the processor and it will come with it own fan.Put the fan into the routine and the fan will come with instructions.After that, you install RAM with firm pressure.Every motherboard is different so the challenge is to get the motherboard into the case and see which on the motherboard are going to actually match up with the whole.There will be an obvious connector for the motherboard so you have to be careful with this step.
Finally,the most important thing is that installing hard drive inside the case.To install the hard drive,you have to use bracket.The bracket comes with screws.After that,you slide hard drive into approciate slot and connect power supply to the hard disk.To connect hard disk,you must use supplied cable and align red stripe with pin one on motherboard.One side of IED slot will be marked as pin one.Next,install CD drive is aligned properly .You have to use any available power connector and connect drive by using supplied cable.Make sure that you aligned stripe with pin one and connect CD drive audio with supplied cable.Then,install optonal AGP video card inside your computer.This step is the most important step so you must be careful.
In conclusion,to build a PC you have to prepare many things such as materials and methods to make up it successfully.It is difficult to build a PC but I strong believe that you will to that easily if you really like it and want to make a product by yourselves.